The windows are actually large holes on the walls of your home. If they are not installed correctly, the durability and warranty of the windows can dwindle. As a result of improper installation, the wall is also open to the moisture problem. To install the windows correctly you can call the professionals of windows and doors Barrie. However, just check the following points out to double check the works that the professionals are doing.barrie windows and doors

Accept That Water Gets Behind the Siding

One of the reasons for which the windows do not get installed correctly is the unrealistic expectations from the sidings. The professionals say that it is natural for water to slide behind the siding no matter how you try. The moisture that ends up in the house wrap, slides through the wall. However, if the window is not installed correctly then it is easier for the moisture to leak into the wall. This moisture leads to the growth of molds which causes health problems to you and your family.

Read the Guidelines

Most manufacturers are aware of the disastrous effect that improperly installed window can cause. For this reason, they provide details of installation instruction for their particular product. The windows and doors Barrie experts will advise you to check whether the professionals, that you have hired, understood the instructions properly. If the instructions are followed correctly, it will help to maintain the dryness of the wall cavity guarantees the experts.

barrie windows

When The Guidelines Conflict

Nowadays, every window product has got separate sets of guidelines. The manufacturers demand that their respective guidelines should be followed to get the warranty. However, you might face such situations where the manufacturer’s guideline for different products contradicts. In this case, the experts of windows and doors Barrie advise you to use the guideline which is most stringent. They explained that the manufacturers cannot blame you if you take more precautions than they have written in the guidelines.

windows and doors barrie

Prepare the Rough Opening

The experts urge you not to use the x-cut in the house wrap. They advise you to use the top tab cut technique. Along with that, you should use pan flashing to collect and drain any water that does get through.

Caulk, Shim And Nail the Window

The experts of windows and doors Barrie warn that the caulk should be applied to the building and not on the window itself. They also warned about applying the caulk along the bottom line of the window. They explain that the sealed bottom might trap water in the pan flashing which could lead to the problem in future. At the time of installing larger windows, you should be careful to shim under the side jambs and in the centerpiece of each window. You should also remind the hired professionals to remove the glass of the larger windows. So that any bad incident related to broken glass could not take place. Without the window glass, the professionals can also install the window more easily.

Installing a window is an important and delicate job. The experts of windows and doors Barrie thus advise you not to do the job yourself and rely on the professionals.